-
£49.99
- 1600 round capacity
- Compact size allows the M12 to fit in a standard double-stack M4/M16 magazine pouch
- Each rotation of the crank loads 12 BBs
- Integrated winding clutch prevents magazine overfilling
- The dot matrix allows for easy identification of the owner or contents
- Sound dampening buffer pre-installed
The M12 Sidewinder is an essential piece of gear for every Airsoft player’s kit. With the quick spin of a crank, almost any M4 mid-cap magazine can be fully loaded in under 5 seconds. The compact size of the M12 Sidewinder perfectly fits inside any double M4 mag pouch and can easily be carried into the field. The capacity of this speed loader allows you to load twelve mid caps before needing to refill. Designed by an Airsoft player for the players, the M12 Sidewinder is the last speed loader you’ll ever need.
Using to load PTS EPM-1 Magazines
The clutch must be adjusted for the M12 Sidewinder to be used with PTS EPM-1 Magazines. If not, the gears will likely break, which will not be covered under warranty.
See instructions on adjusting the clutch below:
https://www.odininnovations.com/troubleshooting?fbclid=IwAR24kB1AdyEJpcuYf16mX0HxDH_LtA7ceybxigACR8203k8wMrv-BKLdH7c
-
£76.99
Nuprol Large Hard Case is designed to protect your airsoft guns while not being used or transported to and from the game, thanks to its durable casing & inner wave foam.
Features:
- IP67 Dust & Water Protection
- Four easy closing latches to keep it shut.
- Wheels on the bottom with a handle at the top to easily pull the case along.
- Side handle to carry by hand.
- Inner padding on the top and bottom keeps the contents secure and protected.
- 2 Padlock holes on the front edge.
- Available in 4 colours: Black, Tan, Green, Grey
- External Size: 109×39×15cm (42.92×15.35×5.91 inch)
- Internal Size: 101×32×12.5cm (39.76×12.59×4.92 inch)
- Weight: 5.5kg
-
£79.99
Nuprol Large Hard Case is designed to protect your airsoft guns while not being used or transported to and from the game. Features:
- IP67 Dust & Water Protection
- Pick & Pluck Foam
- Four easy closing latches to keep it shut.
- Wheels on the bottom with a handle at the top to easily pull the case along.
- Side handle to carry by hand.
- Inner padding on the top and bottom keeps the contents secure and protected.
- 2 Padlock holes on the front edge.
- Available in 4 colours: Black, Tan, Green, Grey
- External Size: 109×39×15cm(42.92*15.35*5.91 inch)
- Internal Size: 101×32×12.5cm(39.76*12.59*4.92 inch)
- Weight: 5.5kg
-
£9.99
- PVC Airsoft Patch
- Lots of funs designs
- Collect and represent the community in style!
These patches are velcro backed, meaning they fit onto any female velcro surface and are constructed from PVC with a 3D effect, showcasing loads of detail with their raised and recessed design. With different designs to choose from, you are sure to find something to suit!
-
£9.97
- PVC Airsoft Patch
- Lots of funs designs
- Collect and represent the community in style!
These patches are velcro backed, meaning they fit onto any female velcro surface and are constructed from PVC with a 3D effect, showcasing loads of detail with their raised and recessed design. With different designs to choose from, you are sure to find something to suit!
-
£9.99
- PVC Airsoft Patch
- Lots of funs designs
- Collect and represent the community in style!
These patches are velcro backed, meaning they fit onto any female velcro surface and are constructed from PVC with a 3D effect, showcasing loads of detail with their raised and recessed design. With different designs to choose from, you are sure to find something to suit!
-
£9.99
- PVC Airsoft Patch
- Lots of funs designs
- Collect and represent the community in style!
These patches are velcro backed, meaning they fit onto any female velcro surface and are constructed from PVC with a 3D effect, showcasing loads of detail with their raised and recessed design. With different designs to choose from, you are sure to find something to suit!
